Battery Bypass Kit for SurRon / Segway

This kit is used to bypass the stock Sur-Ron battery and unlock the full potential of the Panasonic cells. This will allow your bike to safely run at 7500W, attempting to pull more can damage your battery.

BYPASSING YOUR BATTERY WILL DO NOTHING ON THE STOCK CONTROLLER.

You can charge your battery like normal after doing this mod, but you must monitor your voltage via an external display as there is no discharge protection and you can fully drain your cells. The minimum safe voltage is 52V on your stock 60V Sur-Ron Battery. Also, after bypassing, your percentage readout on the battery will be delayed and is no longer useful which is why you must monitor your voltage externally. When charging, allow your battery to sit on the charger for a couple extra hours after hitting 100% to let the cells balance. This is not required but will increase the life of your battery.

Any modifications done to your battery/motorcycle are done so at your own risk. By bypassing your battery, you're also bypassing the built in precharge circuit within the BMS. This offers critical safety control for inrush current to your controller. This modification is not considered safe. Mishandling lithium batteries can lead to fires, explosion and even death. These are not toys and should be treated with great care. Lithium products should always be stored away from any flammable objects ideally in a metal containment device.