ZERO 11X/APOLLO ULTRA RGB LED DECK

Description

 RGB LED SCOOTER DECK WITH RF REMOTE CONTROL

The boards are manufactured to be in accordance with the scooter warranty, to be efficient, they will be powered only separately at 5V (only at 5V, do not supply with higher voltage, otherwise the warranty is lost), including the power cord and plug USB. Do not power the board in other conditions, as this will void the warranty. They are water and moisture resistant but we do not recommend using scooters in the rain or water on the road or road. They will be installed over the original scooter plate, if you want to give up the original plate due to weight, you can contact us by email for details replacing the original scooter plate with another product (for a fee) much more efficient in terms of weight and strength . after applying the plate over the original plate, we recommend inserting longer screws (see site) as well as wide washers for efficient and firm fixing (see site depending on the size of the screws). All boards are RGB LED lighting, with approximately 368 lighting modes. The lighting type is uniform.

Maintenance: of the plate against dust and dirt: The plate will be cleaned with water solution or special solution for cleaning plastic surfaces, after applying the solution, wipe with a microfiber cloth, and with another clean and dry cloth dry the plate.

Note: Do not improvise, cut the cord, do not neglect the instructions, do not supply voltage other than that specified. This will damage the product and void the warranty! The height of the plates is 10 mm.